CAME GARD 4 SERIES Installation Manual

Also see for GARD 4 SERIES: Installation manual Instruction manual

Contents

CAME GARD 4 SERIES Installation Manual Manual pdf 4 page image

Page 44 - Manual code: 119GU55119GU55 ver. 1.11.1 01/2012 © CAME cancelli automatici s.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.ENGLISHThis symbol shows parts which must be read with care.This symbol means the parts which describe safety issues.This symbol tells you what to tell the end-user.GARD 4 is engineered and built by CAME CANCELLI AUTOMATICI S.p.A. in compliance with current safety code.The cabinet is made of galvanised, epoxy powder-coated 2.5 m thick steel sheeting, or of satinated AISI 304 staniless steel 2 mm thick.Inside there is a gearmotor and all of the mechanical moving parts. The control panel is housed in the upper dome.Designed around the anti-shearing dsafety function, it is fitted with safety contacts in the hatch lock and in the emergency release lock. .The operators comes in two versions:001G4040Z - Automatic barrier made of galvanised epoxy poweder-coated galvanised steel with a 24V D.C. powered gearmotor completewith control panel;001G4040IZ - automatic barrier made of satinated AISI 304 stainless steel with a 24V D.C. powered gerarmotor complete with control pa-nel;The following accessories are complementary to the GARD 4 operator:001G03750 - Semi-rounded aluminium white-varnished barrier arm, 4 m long complete with transparent bottom cover-strip and anti-impact profile1 ;001G03752 - Rounded alumiium white-varnished barrier arm, 4 m long comlete with transparent botton cover-strip;001G03753 - Attachment flange for rounded barrier-arm;001G02040 - Balancing spring Ø40 (yellow);001G04060 - Balancing spring Ø50 (green);001G06080 - Balancing spring Ø55 (red);001G03756 - Internal reinforcement for the G03750 semi-rounded barrier;001G03755DX - Joint for semi-rounded barrier arm for right-hand barriers;001G03755DX - Joint for semi-rounded barrier arm for left-hand barriers;002LB38, - Electronic card for connecting three 12V-6Ah batteries ;The following accessories are optional on the GARD 4 operator;001G02801 - Flashing dome-light.001G02802 - Support for applying the DIR photocell onto the cabinet (cannot be used for barriers fi tted with swing skirt and/or swingrest;001G03751 - Emergency battery housing support001G028401 - Luminous cord to signal movement;001G028 402 - Luminous cord connecting cable;001G02807 - Fixed support;001G02808 - Swing rest;001G02809 - Package of 20 red reflective adhesive strips;001G0465 - Swing skirt made of 2 m-long aluminium modules;WARNINGS!001G02802 Cannot be used with with barriers with 001G0465 skirt and/or 001G02808 swing leg support001G02808 For passage widths of up to maximum 3 m.001G03756 - MUST use on barriers with passage widths exceeding 3 m or with the 03756G3 luminous cord.MUST use on barriers with passage widths exceeding 2.5 m or with 001G02808 swing leg support or with 001G0465 skirt.001G02807 For passage width wider than 3.5 m use of the fixed support is mandatory.001G0465 - 001G02808 Cannot be used together.Important! Make sure that the command and safety equipment and accessories are CAME originals; this will ensure easy installation and maintenanceof your system.Passage width is up to 3.75 metres and opening time is between 2 to 6 seconds.Came Cancelli Automatici employs an ISO 9001:2000 certified quality management system and an ISO 14001 environmental manage-ment system. Came entirely engineers and manufactures in Italy.This product is compliant with: see statement of compliance.Legend of symbolsIntended use and limits to useIntended useLimits to useLegislative referencesDescriptionBARRIER automatic GARD 4 is " for l’ in PARKING FACILITIES or public, in areas residential or in zones intensive.Every installation and use other than that specified in this manual is forbidden.