CAME GARD 4 SERIES Installation Manual

Also see for GARD 4 SERIES: Installation manual Instruction manual

Contents

CAME GARD 4 SERIES Installation Manual Manual pdf 8 page image

RPage 8 - Manual code: 119GU55119GU55 ver. 1.11.1 01/2012 © CAME cancelli automatici s.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.ENGLISHThe following illustrations are just examples, in that the space for securing the operator and accessories depends on the overallmeasurements. It is up to the installer to choose the most suited solution.- PLATE.- Dig a pit for the anchoring base and set up the requiredcorrugated tubes for the connections coming out of thejunction pit.N.B. the number of tubes depends on the type ofinstallation and accessories used.- Remove any protruding nuts or wahsers, position the cabinet onto the base and fastenit.Note: install the cabinet with the inspection door facing an easily accessible direction.- Fill the pit with cement and sink the anchoring base (that is, theplate + clamps) making sure the corrugated tubes pass throughthe hole set up on the plate and that they are not filled with cement.The base must be perfectly level, clean and with the bolt threadingcompletely on the surface.Wait at least 24 hrs for everything to solidify.Preparing the automation base