CBN MGC6050F User Manual
                          | |
MMGGCC66005500FF UUsseerr’’ss GGuuiiddeeRev.1.0 (Dec.2013) 112.4. Functional Description DC 12V: Power input for supplying 12V DC power.Caution: If MGC6050F is powered by PoE, do not plug in DC Jack with active DC powerinto DC power connector. MIC/LINE INConnect external audio source or microphone. Line OutConnect speakers with built in amplifier. Audio from remote site is output through Line out in bi-directionalaudio mode. 100Base-T100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af). 2 LEDs on the Ethernet connectorshows the status of MGC6050F as the followings:- Status LED (Dual Color - Red/Green): It will be lit in green or red depending on the status. Green: Green color indicates that the camera is in normal operation mode. Continuous greenindicates that data transmission is possible. Blinking green means that someone isconnected to MGC6050F. Red: Continuous or blinking red indicates that hardware is in abnormal condition.- LINK/LAN LED (Orange)It will be lit with orange color when network cabling is all right. Blinking orange color indicates thatnormal data transmission is under way. Off state indicates that there is trouble in network connection. RS-232C3 Pins on the right of the connector are assigned for RS-232 port. Please note that leftmost pin isnumbered as 1.Pin Description Misc.Red/Green LED will be lit with red momentarily and it will be lit with green after a while whenpower is applied into MGC6050F |
Related manuals for CBN MGC6050F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine