CBN MGC6050F User Manual
                          | |
MMGGCC66005500FF UUsseerr’’ss GGuuiiddeeRev.1.0 (Dec.2013) 174.2. Quick Installation Guide1. Connect PC and MGC6050F to network.1) Prepare a PC to run programs for the installation and video connection(PC is needed to assign IP address to MGC6050F)2) In case of using PoE, connect the PC and MGC6050F to the network using one of the following ways.If your LAN Switch does not support standard PoE, connect MGC6050F as shown in dotted line inFigure 4-1. The DC power is applied through DC adaptor.Figure 4-1. Power and network connection2. Install “IP installer and set IP parameters on MGC6050FInsert the CD provided with product into the PC. Install WinPcap and IP Installer in sequence.IP installer Ver. 3.0.1 or later is needed in the configuration of MGC6050F.Follow the sequence below for setting the IP parameteri) Run IP installer > Select Network Adaptor >OKii) Click in IP installer window.> Double c① lick on > Fill in > make a selection in > Fill the② ④ ⑤parameters in ⑥iii) Click on to apply the settings.⑨iv) You can connect to admin page by clicking on .⑩LAN switch withstandard POE(802.3af)LAN switchDC adaptor |
Related manuals for CBN MGC6050F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine