CCTV Imports JT960 User Manual
                        | |
Contents
| 
19960-Hour Time Lapse Video Cassette Recorder18 960-Hour Time Lapse Video Cassette Recorder• 3/5/10/15/20/25/30 MIN : Recording for the setduration.(MIN : minute)• T.END : Records until the tape end is reached whenthere is alarm trigger input.Alarm Recording Counter DisplayDuring alarm recording, “ “ will be flashing on thedisplay panel.The maximum display number of alarm triggers is “35”,at the next alarm recording the counter will indicate“00”.Connecting to a Monitor for Normal Recording4• Alarm Counter Reset canbe performed by pressingthe CLEAR key in “AlarmTime” of Initial Menuscreen.BACK SIDE OF THE MONITORTIME LAPSE VCRAlarm RecordingAlarm Recording SettingAlarm recording is performed when there is an input(trigger) at the ALARM IN terminal, “ “ is displayedon the display panel.1 Make all necessary connections.2 Press the MENU, SHIFT , SHIFT buttons insequence to display the REC MODE SET menu .3 Press the SHIFT button until the arrow mark( )points to Alarm Rec Set.4 Press the SHIFT button to display the ALARM RECSET menu.5 Press the SHIFT button to select “YES” or “NO”.• YES . . . . . The alarm recording takes place when thereis alarm trigger input• NO . . . . . . The alarm recording does not take place6 Press the SHIFT button to set the Alarm speed.7 Press the SHIFT button to select the desiredrecording speed.• 2H . . . 2-hour mode recording• 6H . . . 6-hour mode recording• 18H . . . 18-hour mode recording• 24H . . . 24-hour mode recording8 Press the SHIFT button to set the alarm duration9 Press the SHIFT button to select the desiredrecording duration.• Auto : Records as long as the alarm signal is beinginput. (Minimum 2 minutes is recorded.)4• During alarm recording allbuttons are disabledexcept the STOP button. Ifthe STOP button ispressed, the alarmrecording will stop.• If an alarm trigger isreceived while alarmrecording is in progress,the recording duration forthe second alarm will becalculated from that point.• When there is a powerloss during alarmrecording, if the power isrestored within therecording set duration,alarm recording willcontinue. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine