Cabletron Systems 9F426-03 User Manual

Also see for 9F426-03: Appendix Appendix

Contents

Cabletron Systems 9F426-03 User Manual Manual pdf 21 page image

2-7Installing the SmartSwitch 9000 ModuleThe Reset SwitchThe Reset switch is located under the top plastic tab as shown in Figure 2-4. Usethe reset switch to reset the module’s processor, shutdown (power down) themodule, and/or restart the module.• To reset the module’s i960 processor, press the reset switch twice within threeseconds.• To shutdown the module, press and hold the reset switch for three or moreseconds.• To restart the module, press the reset switch momentarily.SNMP management may be used to disable this switch to enhance modulesecurity.Figure 2-4. The Reset SwitchSMB CPUReset Switch