Chapter 1: Introduction7F06-02 FDDI SmartSwitch Interface Module User’s Guide 1-31.2.2 7C03 MMAC SmartSwitch, the 7C04 WorkgroupSmartSwitch and the 7C04-R WorkgroupSmartSwitchThe 7F06-02 Module is designed to be installed in the 7C03 MMACSmartSwitch, the 7C04 Workgroup SmartSwitch or the 7C04-RWorkgroup SmartSwitch.The modular design of the 7C03 MMAC SmartSwitch allows othermodules that support Ethernet, Fast Ethernet, ATM, FDDI, or Token Ringto be used with the 7F06-02 Module. These modules provide thecapability to share data without the use of external bridges or routers.The 7C03 MMAC SmartSwitch is a unique module that can be installedin an MMAC Series chassis. The 7C04 Workgroup SmartSwitch and the7C04-R Workgroup SmartSwitch are stand-alone chassis that provide thesame functions.1.3 FEATURESThe 7F06-02 Module provides two FDDI ports via front panel FPIMs.The 7F06-02 Module includes the following features:1.3.1 FPIMsThe front panel connections are standard Cabletron FPIMs. TheseFPIMs allow the use of single mode or multimode fiber cable withMIC or SC type connectors.1.3.2 LANVIEW LEDsThe 7F06-02 uses LANVIEW, Cabletron Systems built-in visualdiagnostic and status monitoring system. With LANVIEW LEDs, you canquickly identify, at a glance, the status of the device connected to a porton the 7F06-02 Module.