Cabletron Systems HSIM HSIM-G01 User Manual

Cabletron Systems HSIM HSIM-G01 User Manual Manual pdf 20 page image

Chapter 2: Installation2-6HSIM-G01/G09 User’s Guide11. Secure the HSIM-G to the module standoffs using the standoff screwssaved in step 6.12. Reattach the chassis cover to the standalone device, reconnect thepower cord, and reconnect the standalone device to the network.2.3 CONNECTING TO THE NETWORKThe HSIM-G has an SC style connector for the network port. CabletronSystems offers fiber optic cables that use SC style connectors which arekeyed to ensure proper crossover of the transmit and receive fibers. Checkthe fiber specifications in Appendix A for each HSIM-G carefully beforeconnecting an HSIM-G to the network.Figure 2-3 HSIM-G Port DesignationsEnsure that the chassis cover is in place before reconnectingthe power cord.NOTESAn odd number of crossovers (preferably one) must bemaintained between like devices so that the transmit port ofone device is connected to the receive port of the other deviceand vice versa.If the fiber optic cable being used has SC style connectors thatdo not resemble MIC style connectors, or has SC connectorson one end and a different type on the other, such as STconnectors, ensure that the proper cross over occurs.Receive (RX) Port 2398_RxTxPortsHSIM-GLNKSXTransmit (TX) Port