USING OTHER AVAILABLE FUNCTIONS13-213.3 RESETTING AUTO MODE (TOKEN RING)You can reset your Token Ring boards to Auto Mode at the Reset SystemParameters Screen. (For more information on Auto Mode and itsassociated settings, please refer to Chapter 5.)To reset your Token Ring boards to Auto Mode:1. Using the arrow keys, highlight the RESET AUTO MODEBOARD 1 option at the bottom of the screen.2. Use the Shift I (or - ) key to toggle to the desired Board number.3. Press Return. The message, TOKEN RING BOARD 1 AUTOMODE RESET BY IRM OPERATOR, will appear indicating that thedesignated Token Ring board has been reset to Auto Mode.13.4 ENABLING AND DISABLING ALL ETHERNET ORTOKEN RING PORTSYou can enable or disable all your Ethernet or Token Ring ports at thefollowing screens:• MMAC Statistics• Port Status• Link Status13.4.1 Enabling and Disabling All Ethernet PortsTo enable or disable the Ethernet boards at the Port Status or Link StatusScreens:1. 1. Use the arrow keys to highlight the ENABLE ETHERNET orDISABLE ETHERNET option at the bottom of the screen.2. Press Return. The message ALL PORTS ENABLED (DISABLED)BY IRM OPERATOR will appear.
