Cabletron Systems MRXI 10BASE-T User Manual

Contents

Cabletron Systems MRXI 10BASE-T User Manual Manual pdf 13 page image

ATTACHING THE CONSOLEPage 2-42.2 CONSOLE CABLE CONFIGURATIONA single female DB-9 receptacle provides a Console interface to themanagement terminal. Depending on your specific terminal, one of twocable configurations (9 pin to 25 pin or 9 pin to 9 pin) is used for theconnection to the MRXI Console port. Figure 2-2 shows the pinout forboth cables.Figure 2-2. Console Cable PinoutsConnect the console to the MRXI as follows:1. Attach the male 9-pin connector to the CONSOLE port on the rearof the MRXI.2. Attach the female end (25-pin or 9-pin, as applicable) to the COMMport on the terminal.23578CONSOLE PORT LOCAL MANAGENTCONSOLETRANSMIT RECEIVERECEIVE TRANSMITREQUEST TO SENDCLEAR TO SENDSIGNAL GROUNDREQUEST TO SENDCLEAR TO SENDSIGNAL GROUND9 PIN TO 9 PINCABLEMALE - DB-9(9-Pin Connector)235782357TRANSMITRECEIVERECEIVETRANSMITREQUEST TO SENDCLEAR TO SENDSIGNAL GROUND SIGNAL GROUND9 PIN TO 25 PINCABLE FEMALE - 25 Pin"D" Shell Connector20 DATA TERMINAL READYMALE - DB-9(9-Pin Connector)FEMALE - DB-9(9-Pin Connector)23578 CLEAR TO SEND