Cabletron Systems MicroMMAC 22ES User Manual

Also see for MicroMMAC 22ES: Reference guide Installation guide

Contents

Cabletron Systems MicroMMAC 22ES User Manual Manual pdf 37 page image

Setting the System TimeMicroMMAC Local Management User’s GuidePage 4-54.3 SETTING THE SYSTEM TIMETo set the system clock, perform the following steps:1. Use the arrow keys to highlight the System Time field.2. Enter the time in a 24-hour format, HH:MM:SS.3. Press ENTER to set the system clock.4. Use the arrow keys to highlight the SAVE command field at thebottom of the screen and press ENTER.If the time entered was a valid format, the Event Message field at thetop of the screen displays “SAVED OK.” If the entry was not valid,Local Management does not alter the current value and refreshes theSystem Time field with the previous value.4.4 SETTING THE HOST IP ADDRESSTo set the host IP address, perform the following steps:1. Use the arrow keys to highlight the Host IP Address field.2. Enter the IP address using Decimal Dotted Notation (DDN) format.For example: 134.141.25.173. Press ENTER. If the IP address entered was a valid format, the cursorreturns to the beginning of the Host IP Address field. If the entry wasnot valid, the Event Message field displays “INVALID IP ADDRESSOR FORMAT ENTERED.” Local Management does not alter thecurrent value and refreshes the Host IP Address field with the previousvalue.4. Use the arrow keys to highlight the SAVE command field.5. Press ENTER. The Event Message field at the top of the screendisplays “SAVED OK.”NOTEWhen entering the time in the system time field, you do notneed to add separators between hours, minutes, and seconds,as long as each entry uses two decimal numbers. For example,to set the time to 6:45 a.m., type “064500” in the System Timefield.