Cabletron Systems MicroMMAC 22ES User Manual

Also see for MicroMMAC 22ES: Reference guide Installation guide

Contents

Cabletron Systems MicroMMAC 22ES User Manual Manual pdf 44 page image

Chapter 5: SNMP Community Names ScreenPage 5-2MicroMMAC Local Management User’s Guide5.1 COMMUNITY NAME ACCESS POLICYIn order to perform any operations on the SNMP Community Namesscreen, you must have used the super-user community name at the UserPassword prompt when initiating the Local Management session. Thedefault community name for each access level is public or press ENTER.The following definitions explain each of the three levels of access:read-onlyThis access level allows reading of device parameters not includingcommunity names.read-writeThis access level allows editing of some device configuration parametersnot including changing community names.super-userThis access level allows full management privileges.5.2 SETTING SNMP COMMUNITY NAMESTo set a community name, perform the following steps:1. Use the arrow keys to highlight the community name you want tochange.2. Type the new community name and press ENTER. The oldcommunity name text disappears and is replaced by the newcommunity name.3. Use the arrow keys to highlight the SAVE command field.4. Press ENTER. The Event Message field at the top of the screendisplays “SAVED OK.”!CAUTIONIf you edit the super-user community name, be certain you donot forget it. If you do, you will be unable to perform LocalManagement functions without returning the device to itsfactory default configurations. This will effectively erase anyconfiguration work you may have done.