Cabletron Systems SmartSTACK 100 ELS100-16TX Getting Started

Also see for SmartSTACK 100 ELS100-16TX: User guide

Contents

– 7 –Connecting the Local Console Managerto a TerminalThe Local Console Manager (LCM) is a command-line interfacefor configuring, monitoring, and managing the ELS100-16TXthrough the out-of-band RS232C connection on the front panel.To connect LCM:1. Connect your VT series terminal or terminal emulator to theout-of-band management RS232C port on the front panel ofthe ELS100-16TX using the twisted pair cable with RJ45connectors shipped with the unit. (Only three of the nine wiresare necessary: Receive Data, Transmit Data and ground.)2. Set the terminal to 9600 baud, 8N1: 8 data bits, no parity, 1stop bit, and no flow control.3. Press the Enter key several times. If the ELS100-16TX isoperational, LCM responds with the ELS100-16TX > prompt.LCM is now ready to use. Refer to the SmartStack 100ELS100-16TX User’s Guide for an overview of LCM and thecommand syntax. LCM commands for the ELS100-16TX areprovided in the User’s Guide in chapters dealing with those topics.A complete list of LCM commands appears on the following pages.Pin Signal Name1 Transmit Data (XMT)2 Data Carrier Detect (DCD)3 Data Set Ready (DSR)4 Receive Data (RCV)5 Signal Ground (GND)6 Data Terminal Ready (DTR)7 Request to Send (RTS)8 Clear to Send (CTS)PWRCPURESETCOMPORT STATUS MODETX ACT FDX MONRX COL 100 USRSTATUSELS100-16TX EPIM100EPIM10010X 12X 14X 16X9X 11X 13X 15X2X 4X 6X 8x1X 3X 5X 7XLINKSTATUSLINKSTATUS2 4 6 8 10 12 14 161 3 5 7 9 11 13 15PWRCPURESETCOMPORT STATUS MODETX ACT FDX MONRX COL 100 USRSTATUSELS100-16TX EPIM100EPIM10010X 12X 14X 16X9X 11X 13X 15X2X 4X 6X 8x1X 3X 5X 7XLINKSTATUSLINKSTATUS2 4 6 8 10 12 14 161 3 5 7 9 11 13 15VT Terminal ConnectionPC Terminal Emulator Connection

/ 16

Related manuals for Cabletron Systems SmartSTACK 100 ELS100-16TX