Cabletron Systems SmartSTACK 100 ELS100-16TX Getting Started

Also see for SmartSTACK 100 ELS100-16TX: User guide

Contents

– 2 –Setting Up and Powering Up theELS100-16TXSetting up and powering up your ELS100-16TX is a simpleprocess that requires you to:• attach the power cord and connect to a power source• check power-up diagnostics sequenceAttaching Power Cord and Connecting to a PowerSourceA power cord is provided with the ELS100-16TX. Attach the powercord to the power cord connector on the back of theELS100-16TX.The ELS100-16TX is not equipped with an on/off switch. To power-up the unit, connect the power cord to a 120 VAC or 240 VACsingle-phase stress grounded outlet.Checking the Power-up Diagnostics SequenceBefore connecting any devices to the ELS100-16TX, power on theunit and observe the power-up diagnostics sequence to check forproper operation.To observe the power-up diagnostics sequence completely, youmay want to repeat it. To restart the power-up sequence press thereset switch on the front panel.When you power up the ELS100-16TX, the following occurs:1. The Power (Pwr) LED is on.2. The CPU LED starts flashing. Two of the Port Status ModeLEDs are on.THIS DEVICE COMLPIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTEFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.ELS100-16LISTED16EOITE MULTIPORTSWITCH UNITLINE:100-125V~1.0A200-240V~ 0.5A50/60HzUL® UL®C TUV RheinlandgaprOfteSicherheitSNNET.ADD.PWRCPURESETCOMPORT STATUS MODETX ACT FDX MONRX COL 100 USRSTATUSELS100-16TX EPIM100EPIM10010X 12X 14X 16X9X 11X 13X 15X2X 4X 6X 8x1X 3X 5X 7XLINKSTATUSLINKSTATUS2 4 6 8 10 12 14 161 3 5 7 9 11 13 15Reset Switch