3-20Configuring Your ELS100-16TXThe two Management Information Base (MIB) variables forconfiguring multicast storm protection are:• kxifTxStormCnt – specifies the maximum number of multicaststhat can be broadcast within the given time.• kxiTxStormTime – specifies the period of time that the maximumnumber of multicasts can be broadcasted.Refer to the ELS100-16TX Release Notes for a complete listing anddescription of MIB variables.3.14 MODIFYING MIB VARIABLESSpecific instructions for controlling ELS100-16TX operations,modifying parameters, and so on, depend on the NMS you areusing. This manual provides instructions for using LCMcommands. However, LCM commands do not exist for allconfiguration options. You may need to modify your configurationusing an NMS.This section provides several common MIB variables you maywant to change. Refer to the ELS100-16TX Release Notes for acomplete listing and description of MIB variables.Each variable is first described in words, and is then identified inMIB form, for example, kxadminGetPass - {kxadmin 3}. The DisplayString line shows the range of values that can be used for the givenparameter. In each case, the DisplayString is a string of ASCIIcharacters.3.15 SYSTEM CONTACTThe system contact parameter identifies the contact person who isresponsible for operating the ELS100-16TX. Typically, thisparameter includes the person’s name, company or division name,and telephone number.sysContact - {system 4}DisplayString (SIZE (0..255))
