Cabletron Systems SmartSTACK ELS100 Installation And User Manual

Also see for ELS100: Quick installation guide

Contents

Cabletron Systems SmartSTACK ELS100 Installation And User Manual Manual pdf 30 page image

16 Installation ELS100-24TXMounting the Switch in a RackThe switch ships with two (2) multi-position mounting ears and four (4)mounting screws.Figure 2-2 shows the orientation of the mounting ears for attaching theears to the switch for a rack mount application. Mount the switch with thefront panel facing forward. Do the following:1. Mount one of the ears to the switch using two (2) of the suppliedscrews. Repeat this step for the other side of the switch.2. Slide the switch into the rack and align the holes in the rack mountingears with the holes in the rack rails.3. Insert and tighten appropriate rack-mounting screws (notprovidedFigure 2-2. Mounting the Switch in a RackThe mounting screws are used to attach the mount-ing ears to the switch. Once the ears are attached tothe switch, you will need to provide appropriatescrews to mount the switch in a rack.