Cabletron Systems SmartSTACK ELS100 Installation And User Manual

Also see for ELS100: Quick installation guide

Contents

Cabletron Systems SmartSTACK ELS100 Installation And User Manual Manual pdf 68 page image

54 Configuring & Monitoring The Switch ELS100-24TX5. Select one or more Trap Destination entries from the menu and enterthe appropriate IP addresses.6. For each trap destination entered, a corresponding community nameshould be entered.Viewing Switch StatisticsTo view switch statistics, do the following:1. Select Switch Statistics Screen from the Main Menu.The screen lists the main statistical counts for all ports on the switchsimultaneously.2. Select Switch Summary from the Switch Statistics Screen.The screen lists a summary of sum total statistics for all ports on theswitch.3. Select Port Statistics from the Switch Statistics Screen.4. Enter the port number. Press [Enter].The screen lists expanded port-level statistics for an individual port.5. On any of the statistics screens, select Clear to clear (zero) thedisplayed statistical counts and Refresh to refresh (update) thedisplayed statistical counts.Configuring Port MirroringYou can mirror the traffic being switched on any port for the purposes ofnetwork traffic analysis and connection assurance. When Port Mirroringis enabled, one port in each group of eight becomes a monitor port for anyone of the other ports within the group.To configure port mirroring, do the following:1. Select Switch Configuration Menu from the Main Menu.2. Turn the switch port mirroring operation on or off by toggling the PortMirroring Enable option (pressing g).3. Select Mirrored Port for the port to be mirrored (traffic informationsource) and enter the number of the port. Press [Enter].4. Select Mirroring Port for the port which receives the mirrored data(traffic information destination) and enter the number of the port.Press [Enter].5. Select Transmit Data Mirror Enable to mirror the data beingtransmitted out the mirrored port to the mirroring port. Alternatively,select Receive Data Mirror Enable to mirror the data being receivedon the mirrored port to the mirroring port. Only one of theseparameters can be enabled at a given time.6. Connect a traffic analyzer or RMON probe to the mirroring port.