Cabletron Systems SmartSwitch Router 520 Installation And Configuration Manual

Contents

Cabletron Systems SmartSwitch Router 520 Installation And Configuration Manual Manual pdf 50 page image

Configuring the Router4-4Console ScreensAfter the configuration exists in the clearVISN Router Configurator, for newrouters, the following screens show the power-up sequence of the router beingloaded by EasyStart:SmrtSwtch Rtr 5xx===============================================================SmrtSwtch Rtr 5xx INSTALLATION MENU* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *To fully manage this device telnet to one of thefollowing IP addresses or select item [3] below.Out-of-Band: Not ConfiguredIn-Band : None Operational or Configured* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *[1] Restart with Factory Defaults[2] Restart with Current Settings[3] Go to Local Console==================================================================Enter selection : 00:00:05 EZ.001: Starting.00:00:06 EZ.007: Waiting up to 6 seconds for devices to pass self-test.00:00:08 AI.001: Changed params on ifc 1 (Serial Datalink),from PSL to Frame Relay.00:00:08 EZ.002: Changed one or more cfg params.00:00:08 BTP.010: net 0, int Eth/0, Sent client request (htype: 1)00:00:08 BTP.011: net 1, int SL/0, Could not snd client req because: Ifc not up00:00:08 BTP.011: net 2, int ISDN/0, Could not snd client req because: Ifc type not suptd00:00:08 BTP.007: net 0, int Eth/0, Valid Resp,Server: Unknown(130.130.130.28),Bootfile: C:\Program Files\Cabletron\RConfig\DRS\rf10935f.drs.SRMVendOpts config file: NoneIpAddr 100.100.100.47, gwAddr 0.0.0.000:00:08 BTP.012: net 0, int Eth/0 No cfile in vendOptions, using bootfile fld instead00:00:08 EZ.004: Rcvd boot info: ipAddr 100.100.100.47,ipMask 255.255.255.0 on intf 000:00:08 EZ.009: *** Restarting Router ***Continued on the next page . . .