Cabletron Systems SmartSwitch Router 520 Installation And Configuration Manual

Contents

Cabletron Systems SmartSwitch Router 520 Installation And Configuration Manual Manual pdf 51 page image

Configuring the Router4-5The router has been configured and is now ready to be used on the network.=====================================================================SmrtSwtch Rtr 5xx INSTALLATION MENU* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *To fully manage this device telnet to one of thefollowing IP addresses or select item [3] below.Out-of-Band: Not ConfiguredIn-Band : 100.100.100.47* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *[1] Restart with Factory Defaults[2] Restart with Current Settings[3] Go to Local Console====================================================================Enter selection : 00:00:05 EZ.001: Starting.SmrtSwtch Rtr 5xx00:00:06 EZ.007: Waiting up to 6 seconds for devices to pass self-test.00:00:08 TFTP.025: Starting tftp of file C:\Program Files\Cabletron\RConfig\DRS\rf10935f.drs.SRM from 100.100.100.2800:00:08 TFTP.027: Transfer completed successfully.Writing to NVRAM.00:00:08 TFTP.028: Writing to NVRAM completed.00:00:08 EZ.008: TFTP transfer completed successfully.*** EasyStart Completed Successfully ***00:00:08 EZ.009: *** Restarting Router ***SmrtSwtch Rtr 5xx====================================================================SmrtSwtch Rtr 5xx INSTALLATION MENU* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *To fully manage this device telnet to one of thefollowing IP addresses or select item [3] below.Out-of-Band: Not ConfiguredIn-Band : 100.100.100.47* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *[1] Restart with Factory Defaults[2] Restart with Current Settings[3] Go to Local Console====================================================================Enter selection :