TESTING AND TROUBLESHOOTINGPage 4-54.3.2 Alarm MessagesAlarm messages pertain to events that occur within the TRXI. Pressthe Display button and hold for five seconds to access the AlarmMessages queue. You can scroll through each message by pressing theDisplay button. If you do not press the Display button for ten seconds,the LCD defaults to the product name.Displayed Messages CommentsNo Messages in No alarm messages in queue. This isQueue the Alarm Messages default setting.Port xxxxxx Network port or TPIM turned offDisabled via Local or Remote Management.Port xxxxxx Network port or TPIM turned onEnabled via Local or Remote Management.Port xx Violation Indicates unauthorized accessattempt at network lobe ports.Ring Beaconing Indicates a station is attempting torecover from a hardware problem onthe ring.Beacon Recovered Indicates the ring has recoveredfrom a beaconing situation.Beacon Recv Indicates that a station has beenPort xx Removed removed from the ring as a result ofthe beacon recovery process.Ring Port xx Faulted Indicates a TPIM RI or RO hasAutowrapped.Fault Recovery Oscillation Indicates that the network has beenin and out of a beaconing stateseveral times.
