Cadillac 2006 CTS Personalization Manual

Also see for 2006 CTS: Owner's manual Owner's manual Manual

Contents

C T SThe mirrors can be folded manuallyinward to prevent damage in carwashes or garages. Return themirrors to their normal positionsbefore driving. The mirrors also areheated to clear fog, snow or icewhen the rear defogger is on. Referto Comfort/Convenience section ofthis guide.CURB VIEW ASSIST MIRROR(if equipped)If your CTS is equipped with theMemory Seat and Mirrors option, itwill also have the Curb View Assistfeature. When activated through theDriver Information Center (DIC), thepassenger’s mirror will tilt to apre-selected position when thevehicle is shifted into reverse toassist the driver when parallelparking. If further adjustment isneeded, the standard power controlscan be used. Five seconds aftershifting out of reverse, the mirror willreturn to its original position. TheCurb View Assist feature can beenabled/disabled through the DIC.MEMORY SEAT AND MIRRORSSetting Driver’s PositionThe buttons to set the seat andmirror memory are on the driver’sarmrest. To set the memory, firstensure that seats and mirrors are“On” in the Personalization section ofthe DIC. Then, adjust the driver’sseat, including the seatback reclinerand both outside mirrors.1. Press and hold button 1 until twobeeps are heard to confirmmemory setting.2. Repeat the procedure using button2 to store memory for a seconddriver.Setting Exit Position1. Press button 1 or the unlocksymbol on the keyless entry fobwith number 1 on the back.Adjust the driver’s seat to thedesired exit position.3. Press and hold the exit buttonuntil two beeps are heard toconfirm exit memory setting.Repeat the procedure for a seconddriver using button 2 or the unlocksymbol on the keyless entry fobwith 2 on the back.To recall stored exit positions, pressand release the exit button. A beepwill sound and the seat will move tothe memory exit position for theidentified driver. If no exit position isstored, the seat will move all the wayback.Vehicles with automatic transmissionsmust be in Park to recall exitpositions. For manual transmissions,the parking brake must be set if theengine is running.312