Flash-to-PassThis feature lets you use your high-beamheadlamps to signal a driver in front of you thatyou want to pass. It works even if your headlampsare in the automatic position.To use it, pull the turn signal lever toward you,then release it.If your headlamps are in the automatic position oron low beam, your high-beam headlamps willturn on. They will stay on as long as you hold thelever toward you. The high-beam indicator onthe instrument panel cluster will come on. Releasethe lever to return to normal operation.Windshield WipersYou control the windshield wipers by turning theband with the wiper symbol on it.8 (Mist): For a single wiping cycle, turn theband to mist. Hold it there until the wipersstart. Then let go. The wipers will stop afterone wipe. If you want more wipes, hold the bandon mist longer.6 (Delay): You can set the wiper speed for along or short delay between wipes. This can bevery useful in light rain or snow. Turn the band tochoose the delay time. The closer to the top ofthe lever, the shorter the delay.6 (Low Speed): For steady wiping atlow speed, turn the band away from you to thefirst solid band past the delay settings.1 (High Speed): For high-speed wiping,turn the band further, to the second solid bandpast the delay settings.9 (Off): To stop the wipers, move the bandto off.Be sure to clear ice and snow from the wiperblades before using them. If they are frozen to thewindshield, carefully loosen or thaw them. Ifyour blades do become worn or damaged, getnew blades or blade inserts.198InformationProvidedby:
