Temperature – A, B, CThe temperature grades are A (the highest), B,and C, representing the tire’s resistance tothe generation of heat and its ability to dissipateheat when tested under controlled conditions on aspecified indoor laboratory test wheel. Sustainedhigh temperature can cause the material of the tireto degenerate and reduce tire life, and excessivetemperature can lead to sudden tire failure.The grade C corresponds to a level of performancewhich all passenger car tires must meet underthe Federal Motor Vehicle Safety StandardNo. 109. Grades B and A represent higher levelsof performance on the laboratory test wheelthan the minimum required by law.Warning: The temperature grade for this tire isestablished for a tire that is properly inflatedand not overloaded. Excessive speed,underinflation, or excessive loading, eitherseparately or in combination, can cause heatbuildup and possible tire failure.Wheel Alignment and Tire BalanceThe tires and wheels on your vehicle were alignedand balanced carefully at the factory to give youthe longest tire life and best overall performance.Adjustments to wheel alignment and tirebalancing will not be necessary on a regular basis.However, if you notice unusual tire wear or yourvehicle pulling to one side or the other, thealignment may need to be checked. If you noticeyour vehicle vibrating when driving on a smoothroad, your tires and wheels may need to berebalanced. See your dealer for proper diagnosis.Wheel ReplacementReplace any wheel that is bent, cracked, or badlyrusted or corroded. If wheel nuts keep comingloose, the wheel, wheel bolts, and wheelnuts should be replaced. If the wheel leaks air,replace it (except some aluminum wheels,which can sometimes be repaired). See yourdealer if any of these conditions exist.Your dealer will know the kind of wheel you need.474InformationProvidedby:
