SRCE (Source): Press to select a source, either radio,CD, DVD, or auxiliary, if your vehicle has this feature.The CD or DVD must be loaded to select the source andto play. CD or DVD displays if a disc is loaded. If aCD or DVD is not loaded, the display changes to theauxiliary source, if your vehicle has this feature, orcontinue to play the radio.Vehicle Noise Compensation (VNC): Your vehicle hasa Bose® audio system. It includes Bose AudioPilot®noise compensation technology. When turned on,AudioPilot® continuously adjusts the audio systemequalization, to compensate for background noise,so that the audio always sounds the same at the setvolume level.This feature is most effective at lower radio volumesettings where background noise can affect how wellthe music is being heard through the audio system.At higher volume settings, where the music is muchlouder than the background noise, there might be littleor no adjustments by AudioPilot® .Turn the AudioPilot® on by pressing the w (tune/select) knob to enter the main menu. Then turn thisknob until VNC:AUDIOPILOT displays. Press this knobto turn AudioPilot ® on and off. An X appears in the boxwhile it is on.To turn AudioPilot® off, press the w knob to enterthe main menu, turn this knob until VNC:AUDIOPILOTappears, and press this knob. The X in the boxdisappears when it is turned off. For additionalinformation on AudioPilot ®, visitwww.bose.com/audiopilot.Finding a StationBAND: Press to select AM, FM1, FM2, or XM1or XM2 (if equipped).w (Tune/Select): Turn to select radio stations.©¨(Seek): Press the left arrow to go to the previousstation and stay there. Press the right arrow to go tothe next station and stay there. The sound mutes whileseeking.The radio only seeks stations with a strong signal thatare in the selected band.©¨(Scan): Press the arrows to enter scan mode.SCAN displays. Press the arrows to scan to thenext station. The radio goes to a station, plays forfive seconds, and then goes on to the next station.Press the arrows again to stop scanning.3-69
