The vehicle comes with two transmitters. Eachtransmitter will have a number on top of it, “1” or “2”.These numbers correspond to the driver of the vehicle.For example, the memory seat position for driver 1 willbe recalled when using the transmitter labeled “1”,if enabled through the DIC. See Memory Features onpage 2‑6 and DIC Vehicle Customization onpage 4‑57 for more information.Programming Transmitters to theVehicleOnly RKE transmitters programmed to this vehiclewill work. If a transmitter is lost or stolen, a replacementcan be purchased and programmed through yourdealer/retailer. When the replacement transmitter isprogrammed to this vehicle, all remaining transmittersmust also be reprogrammed. Any lost or stolentransmitters will no longer work once the newtransmitter is programmed. Each vehicle can haveup to eight transmitters programmed to it. See “RelearnRemote Key” under DIC Operation and Displays onpage 4‑41 for instructions on how to matchRKE transmitters to the vehicle.Battery ReplacementReplace the battery if the REPLACE BATTERYIN REMOTE KEY message displays in the DIC.See “REPLACE BATTERY IN REMOTE KEY” underDIC Warnings and Messages on page 4‑48 foradditional information.Notice: When replacing the battery, do not touchany of the circuitry on the transmitter. Static fromyour body could damage the transmitter.3-6
