SERVICE STABILITRAKIf your vehicle has StabiliTrak ® and this messagedisplays, it means there may be a problem with theStabiliTrak system. If you see this message, try toreset the system. Stop; turn off the engine for at least15 seconds; then start the engine again. If this messagestill comes on, it means there is a problem. You shouldsee your dealer/retailer for service. The vehicle is safeto drive, however, you do not have the benefit ofStabiliTrak, so reduce your speed and drive accordingly.SERVICE SUSPENSION SYSTEMThis message displays when the Road SensingSuspension (RSS) system is not operating properly.Have your vehicle serviced by your dealer/retailer.SERVICE THEFT DETERRENT SYSTEMThis message displays when there is a problem with thetheft-deterrent system. The vehicle may or may notrestart so you may want to take the vehicle to yourdealer/retailer before turning off the engine. SeePASS-Key ® III+ Electronic Immobilizer Operation onpage 3‑24 for more information.SERVICE TIRE MONITOR SYSTEMOn vehicles with the Tire Pressure Monitor System(TPMS), this message displays if a part on the TPMS isnot working properly. The tire pressure light also flashesand then remains on during the same ignition cycle.See Tire Pressure Light on page 4‑35. Severalconditions may cause this message to appear. See TirePressure Monitor Operation on page 7‑68 for moreinformation. If the warning comes on and stays on,there may be a problem with the TPMS. See yourdealer/retailer.SERVICE TRACTION CONTROLIf your vehicle has StabiliTrak, this message displayswhen there is a problem with the Traction ControlSystem (TCS). When this message displays, thesystem will not limit wheel spin. Adjust your drivingaccordingly. See your dealer/retailer for service.See StabiliTrak ® System on page 6‑6 for moreinformation.SIDE BLIND ZONE ALERTSYSTEM OFFIf your vehicle has the Side Blind Zone Alert (SBZA)system, this message displays when the SBZA systemhas been turned off. See Side Blind Zone Alert (SBZA)on page 3‑48 and DIC Operation and Displays onpage 4‑41 for more information.4-54
