DIC Vehicle PersonalizationIf your vehicle has the navigation system, see thenavigation system manual for instructions onoperating the DIC for your vehicle.Your vehicle has personalization that allows you toprogram certain features to a preferred settingfor up to two people. The number of programmablefeatures varies depending upon which model ofthe vehicle is purchased.On all vehicles, features such as climate controlsettings, radio preset settings, exterior lightingat unlock, remote lock and unlock confirmation,and automatic door locks have already beenprogrammed for your convenience.Some vehicles have additional features that canbe programmed including the seat and outsiderearview mirror position.If your vehicle has the ability to program additionalpersonalization features, the driver’s preferencesare recalled by pressing the unlock button on theRemote Keyless Entry (RKE) transmitter, 1 or 2, orby pressing the appropriate memory button, 1 or 2,located on the driver’s door. Certain features can beprogrammed not to recall until the key is placed inthe ignition. To change feature preferences, see“Entering the Personalization Menu” following.Entering the Personalization MenuTo enter the feature programming mode, use thefollowing procedure:1. Turn the ignition to ON, but do not start theengine. Make sure an automatic transmissionis in PARK (P) or a manual transmissionhas the parking brake set.To avoid excessive drain on the battery, it isrecommended that the headlamps areturned off.2. If your vehicle has memory settings, press theappropriate memory button, 1 or 2, located onthe driver’s door armrest. The DIC displaywill show either Driver 1 or 2 dependingon which button was selected.3. Press the PWR/VOL knob to turn theradio on.4. Press the TUNE/SEL knob once to access themain menu of the DIC.5. Turn the TUNE/SEL knob until SETUP ishighlighted.6. Press the TUNE/SEL knob once to access theSETUP menu.239
