CalAmp Viper 100 User Manual

Contents

CalAmp Viper 100 User Manual Manual pdf 90 page image

#9 Viper_SC_Manual_001-5008-000_Rev12e.docx | Page 83Blocks TotalThe WCP server sends the filename in small blocks. This number represents the number of blocks the server dividedthe file into.Block WrittenNumber of blocks that have been successfully written into the Viper non-volatile memoryCompleted (%)Completion ratio (blocks written over total number of blocks)CmdThe last WCP command received by the clientContact your authorized CalAmp representative for availability and details on the Wing Commander Server.4.7.7 FEATURE OPTIONSThe Feature Option page shows the available features and shows which features are currently installed in the Viper SC.Table 12 – Available Feature Options4.8 NETWORK MANAGEMENT/NEIGHBOR TABLEEach unit is equipped with a powerful neighbor discovery module. The purpose is to detect all units in the RF network andadd all necessary IP routes required to reach neighboring units. Vipers discover other Viper by sending and receivingneighbor discovery control messages.From the navigation frame, select Network Management to access Viper Neighbor Management options. This page alsodisplays information about local status, discovered neighbors, and control operations.There are three modes of operations (Manual-Scan, Auto-Scan, Disabled); five states of operations (Ready, Scanning forNeighbors, Disabled, Saving Neighbor Table, Testing Connectivity); and three types of Neighbor Table entries (Static,Dynamic, Locked).Neighbor discovery is only operational in router mode.Option # Name Description009 SNMP Allows SNMP agent activation on the unit.