U ser 's GUide — 433. Store selected Thread Size and find the recommendedCutting Tap Hole Size (Cut Tap Drill Size) and the ThreadOutside Diameter (Minimum Major Diameter):O * 0.t THReD SIZe 1/2 – 28 INCHt(Cut Tap Drill Size) TAP DRILL SIZe 0-15/32 INCHt(Outside Diameter) OD SIZe 0.5000 INCH* In addition to clearing the display, pressing O upon reaching thedesired TPI stores the displayed Thread Size.You can also directly enter a Threads per Inch value instead oftoggling through the available ones. For this example, use a 3/8Inch screw size with 16 TPI and toggle through the availableThread characteristics.KeYSTROKe DISPLAYOO 0.1. Enter the Thread Size:3/8t SIZe 3/8– INCH2. Enter the TPI and store the final Thread Size:16t * THReD SIZe 3/8–16 INCH3. Find the recommended Cutting Tap Hole Size (Cut Tap DrillSize) and the Thread Outside Diameter (Minimum MajorDiameter):t(Cut Tap Drill Size) TAP DRILL SIZe 0-5/16 INCHt(Outside Diameter) OD SIZe 0.3750 INCH* After entering the TPI value, the press of t is required in order tostore the entered Thread Size.Metric Thread Size – Model 4086Enter a 2 mm screw size and toggle through the availablecommon Thread Pitches until 0.4 is reached. Store the ThreadSize and toggle through the available Thread characteristics.(cont'd)KeYSTROKe DISPLAY
