Caliber RMD602 Operating Instructions Manual

Contents

9Radio ModeAccessing Radio ModePress the SRC button on the front panel orremote control to switch to the Radio source.1. Source Indicator2. Current Preset Channels3. Time/Clock4. AM/FM Band5. Radio Station Frequency6. EQ IndicatorSelecting a BandPress BAND once or more to select FM1-FM2 - FM3 - AM1 - AM2.Display shows wave band, frequency, andpreset station number if already stored.Selecting a StationPress the or tuning button to tune toanother station.Tuning- AUTO SEEKPress the or buttons to seek the next/previous station automatically.- MANUAL SEEKPress and hold the or buttons to entermanual tuning mode. Press the buttons againto move the radio frequency number up ordown one step.Note:During manual seeking, if the pause betweentwo operating steps is longer than 5 seconds,press the or buttons, the unit will enterauto seeking.Preset ModeSix numbered preset buttons store and recallstations for each band. The stored stations(P1-P6) for the current band can be viewed onthe screen.Storing Stations- Auto storing1. Select a band (if needed).2. Press AMS briefly to scan the preset stationP1 - P6 for 5 seconds each.3. Hold AMS more than 2 seconds, the6 strongest available stations will beautomatically saved in the preset button(numbers 1-6).- Manual Storing1. Select a band (if needed), then select astation.2. Press and hold a preset button (numbers1-6) on the front panel or remote control.3. The preset number and station is displayedand highlighted.Recalling a Station1. Select a band (if needed).2. Press a front panel or remote controlpreset button (numbers 1-6) to select thecorresponding stored station.21 3456