Caliber RMD602 Operating Instructions Manual

Contents

10USB/SD/MMC/MP3 Playback1. Load SD/MMC CardInsert the SD/MMC card into the slot, withthe front side at left.The unit will play the music automaticallyand the LCD will show CARD.2. Take out SD/MMC CardPress SRC button and switch to non CARDmode, slightly press SD/MMC card, takeout the card when it pops out.3. Load USB EquipmentOpen the rubber cap, insert the USB intothe connector and the unit will play themusic in the USB storer automatically, andthe LCD will show USB.4. Take out USB EquipmentPress SRC button and switch to non USBmode, then take off the USB stick, closethe rubber cap.USB/SD/MMC NotesUSB functions (flash memory type) MP3music play1. SD/MMC card support2. USB flash memory 2 in 1 (SD/MMC)support3. FAT 12/FAT 16, FAT 32 is possible- FAT 12/16 (dir: 180 support, file: 1500support)- FAT 32 (dir: 180 support, file: 1500support)4. Tag (id3 tag ver 2.0)- Title/artist/album: 30 byte support5. Multi card reader not support6. USB 1.1 supportUSB 2.0 support(it can not support USB 2.0 speed. Just, getthe same speed with USB 1.1)Note:Not all kinds of USB devices are compatiblewith the unit.