Camco 16 Owner's Manual
                                    | |
9Preparing to install the refrigerator.Read these instructions completely and carefully.Water Supply to the Icemaker (on some models)You will need to connect your icemaker to a cold water line. Awater supply kit containing copper tubing, shutoff valve, fittingand instructions is available at extra cost from your dealer.There should be sufficient tubing for the icemaker from thecold water supply to allow moving the refrigerator out from thewall several feet. (You will need approximately 3 coils of 1/4inch copper tubing that measures at least 25 cm (10") indiameter.Install the refrigerator on a floor strong enough tosupport it when it is fully loaded.Do not install refrigerator where temperature will gobelow 16°C, 60°F because it will not run often enough tomaintain proper temperatures.Refrigerator LocationAllow the following minimum clearances for ease of installationand proper air circulation:Sides.……2 1/2 cm (1") Top……10 cm (4") Back*……8 cm (3")*(measure from back surface of cabinet to wall)If refrigerator is to be installed against a wall on the hinge side,allow a minimum of 4.5cm (l 3/4") between the wall and theside of the refrigerator to allow for door and handle clearance.ClearancesConsider providing a water supply to the refrigeratorlocation. It will simplify connecting of an optionalautomatic icemaker should you wish to install one at alater date.When Building a New HomeOperating InstructionsInstallation InstructionsTroubleshooting TipsSafety InformationCustomer Service |
Related manuals for Camco 16
manualsdatabase
Your AI-powered manual search engine