Campbell TLX106 Instruction Manual

Also see for TLX106: Instruction manual

Contents

Campbell TLX106 Instruction Manual Manual pdf 28 page image

Section 3. TLX106 Instrumentation Installation3-6If you received a telecommunications kit separate from the TLX106 Enclosure,follow the "Internal Installation" procedures outlined below.3.3.1 Phone ModemsPhone modems enable communications between the TLX106 Enclosure and aHayes compatible modem in your PC over a dedicated phone line. Phone linesurge protection in built into the TLX106 Enclosure.FIGURE 3.3-1. Phone Modem Mounting and Connections3.3.1.1 Internal InstallationFor installation inside the TLX106 Enclosure, the following components areprovided in the phone modem kit:(1) COM200 or COM300 Phone Modem(1) 12 inch RJ-11 Patch Cord(1) Mounting Bracket(4) Screws(1) 12 inch 14 AWG Ground WireInstall the phone modem as shown in Figure 3.3-1.1. Attach the modem to the modem bracket with the 4 screws provided.Mount the modem and bracket into the TLX106 Enclosure with the 3 pre-threaded screws on the mounting plate.2. Connect the modem 9-pin port to the TLX106 Enclosure port with the P/N10588 ribbon cable supplied with the TLX106 Enclosure.3. Connect the modem RJ-ll jack to the TLX106 Enclosure RJ-11 jack withthe RJ-ll patch cord.4. Connect the modem ground port to the TLX106 Enclosure ground withthe 14 AWG ground wire.P/N 10588 CableRJ11 PatchCordGroundWire Modem