Campbell UT20 Product Manual
Also see for UT20: Instruction manualProduct manualInstruction manual
                             | |
Contents
| 
UT20 and UT30 Universal Towers14the guy wires (FIGURE 7-9). Insert the steel drive bar into the anchorbody and drive the anchor into the ground by using a fence post driver orsledgehammer until only the top half of the loop remains above theground.FIGURE 7-9. UTDK duckbill guy anchor being driven into the ground2. Attach a high-lift jack to the loop and jack the anchor up about 6 inches torotate the anchor into the load-lock position (FIGURE 7-10).Failure to install and lock the anchor at the correct anglewill result in the anchor cable cutting through the soiluntil the angles equalize, causing slack in the guy wires.FIGURE 7-10. UTDUK duckbill in load-lock positionWARNING |
Related manuals for Campbell UT20
manualsdatabase
Your AI-powered manual search engine