Cannon PROESSIONAL1000 Use And Installation Instructions

Also see for Professional 1000: Use and Installation Instructions Use and Installation Instructions Use and Installation Instructions Use and Installation Instructions Instruction manual

Contents

conventional oven

14GRIDDLEA non-stick griddle is supplied for use over the two burners on the right hand side of the hob. The griddle ismade of cast iron and the surface is covered with a special nonstick finish. To protect the non-stick coatingnever use metal cooking utensils as they may scratch the surface. Wooden or heat resistant plastic utensilsmay be used. Do not use saucepans on the griddle plate.UNDER NO CIRCUMSTANCES MUST THE GRIDDLE PLATE BE USED OVER ANY OTHER HOTPLATEBURNERS.USE O THE GRIDDLEThe griddle may be used with either or both of the burners on, depending on the food being cooked. Thegriddle can be positioned with the ridged portion at the front or at the rear.1. Secure the griddle above the two simmer burners, on the right hand side of the hob, making sure that thesupport feet are located correctly on the pan support fingers.2. Press the ignition button and then push in and turn the control knob(s) of the burners anticlockwise to the largeflame symbol. Continue to press the ignition button until the spark lights the gas. Preheat the griddle plate forapproximately four minutes.3. Place the food directly on the griddle plate. However when cooking drier foods eg. drop scones the griddleplate can be lightly greased.4. The controls can be left at high for the sealing of foods or turned down to a lower heat setting depending on whatfood is being cooked. NB. A gentle heat is all that is required for the majority of griddling. Once the griddleplate is up to temperature it maintains the cooking temperature on a medium/low setting.5. Cook the food for the required time, which will depend on the type of food being cooked.6. To turn off, push in and turn the control knob(s) fully clockwise to the O position.7. Allow the griddle plate to cool before cleaning.In the event of the burner flames being accidentally extinguished, turn off the burner controls and do notattempt to re-ignite the burners for at least 1 minute.