Canon 0744B001 - DC 10 Camcorder Instruction Manual

Also see for 0744B001 - DC 10 Camcorder: Software guide Instruction manual Instruction manual

Contents

Canon 0744B001 - DC 10 Camcorder Instruction Manual Manual pdf 10 page image

10 Before Downloading Still ImagesBefore Downloading Still ImagesConnecting the Camcorder to a Computer Be sure to install the Digital Video Software before you connect thecamcorder to the computer. Make sure the camcorder is being powered using the power adapter beforeconnecting it to a computer. Connect the USB cable directly to one of the computer’s main USB ports.The interface may not function correctly if the camcorder is connected via aUSB hub. The connection may not operate correctly if you are using other USBdevices, excluding USB mice or keyboards, at the same time. If this occurs,disconnect the other devices from the computer and try reconnecting thecamcorder. Do not connect two or more camcorders to the computer. The camcordersmay not operate normally. Never allow the computer to go into standby (sleep) mode while acamcorder is connected via the USB interface. Refer to your computer manual for the location of the computer’s USB ports. See your camcorder instruction manual for how to connect the camcorder tothe computer and how to change the media setting (MEDIA SEL. ) in theSYSTEM SETUP menu.1 Insert a disc or a memory card containing images into thecamcorder.2 Connect the power adapter to the camcorder.3 Turn the power switch to PLAY and move the / switchto .Wait until the camcorder’s access indicator stops flashing.4 To download still images on the disc, select [DISC] in theSYSTEM SETUP menu.To download still images on the card, select [CARD] in theSYSTEM SETUP menu.5 Attach the supplied USB cable to the computer’s USB portand the camcorder’s USB Terminal.• The first time you connect the camcorder to the computer:- Installation of the DV TWAIN Driver (Windows 98/Windows 2000) or the DVWIA Driver (Windows Me) starts.- If the “Digital signature not found” message appears, click [Yes].- If you are prompted to restart the computer, restart the computer.