Canon 1629B001 - XH G1 Camcorder Manual

Also see for 0967B001 - XL H1 Camcorder: Instruction manual

Contents

Canon 1629B001 - XH G1 Camcorder Manual Manual pdf 40 page image

Camera and Picture ControlVarious Settings and [Performance Check] Camera and Picture Control Recording onto the Hard Disk Playback the Recorded FilesCONSOLE Windows 4-402 Select a destination to export the file.The information of the selected Custom Preset settingis displayed and the settings are applied to thecamcorder only to preview the picture.The camcordersettings have not been set yet.• Select the preset number you wish to export when selecting .• When selecting , specify a file name to be saved.- Select a file from a list of the recently exported and saved files. If you wish to export a filethat is not in the list, click and select a file.3 Check the camcorder picture and the settings, and click [OK].4 Input a preset name, specify the protect mode and click [OK].• When a confirmation window appears, click [Yes].• The Custom Preset file will be saved, and the camcorder settings will be returned to thepreviously selected Custom Preset file setting.Practical Usages of the Custom Preset FilesUse of the Disconnected Camcorder After Adjusting the CustomPreset FilesThis is how to apply the new Custom Preset settings to the camcorder that is disconnected from thecomputer, after adjusting the Custom Preset files by the computer.After disconnecting the camcorder from the computer, you will lose the new Custom Presetsettings adjusted from the computer if you do not save the file to the camcorder. When thecamcorder’s recording mode is set to Camera mode, the camcorder does not retain the newsettings but returns to the Custom Preset settings active on the camcorder before connectingto the computer.1 Adjust the Custom Preset settings. ( 4-37)2 Save the new Custom Preset file to the camcorder.3 Disconnect the DV cable from the camcorder.4 Apply the saved file created in step 2 to the camcorder by operatingthe CUSTOM PRESET SELECT and CUSTOM PRESET ON/OFF buttonson the camcorder.