Canon 1629B001 - XH G1 Camcorder Manual

Also see for 0967B001 - XL H1 Camcorder: Instruction manual

Contents

Canon 1629B001 - XH G1 Camcorder Manual Manual pdf 7 page image

Preparation (Installation, Connection, Launch, Activation)1-7Installing the AV/C Camera Storage Subunit-WIA DriverThe AV/C Camera Storage Subunit-WIA driver is used for downloading and uploading the CustomPreset file (Camcorder settings) from and to the camcorder. When installing the AV/C CameraStorage Subunit-WIA driver, you need to connect the camcorder to the computer. Refer to Connectingthe Camcorder to the Computer ( 1-8). Without Installing the AV/C Camera Storage Subunit-WIA driver, you cannot adjust theCustom Preset settings. This driver will be installed every time you connect a camcorder for the first time. From thesecond time you connect the camcorder, the driver will not be installed. You need to log in as an administrator before installing the software. Close all programs that are running before installing CONSOLE. Do not turn the camcorder’s power off and do not quit the driver’s installation beforecompleting the installation of the driver.7 Click [Finish].1 Turn the camcorder’s power on and activate the DV CONTROLfunction.2 Set the camcorder’s recording program to EXT.CONT.3 Connect the camcorder to the computer using the IEEE1394 (DV)cable. ( 1-8)• For details about connecting the camcorder to the computer, refer to Connecting theCamcorder to the Computer ( 1-8).• When the [Found New Hardware Wizard] window appears, select [No, not this time] andclick [Next]. In the next window, select [Install the software automatically (Recommended)]and click [Next].- If a warning message regarding the installation appears, click [Continue Anyway].• Installation of the driver starts automatically.• Depending on the setting of the computer, an editing software may be launched. If thishappens, close the software.• After completing the installation, [Scanner and Camera Wizard] or a window asking you tochoose the software may be displayed. Click [Cancel] and close the window.4 Check if the driver has beeninstalled correctly.Open [My Computer] and check if the [Canon Camera Storage Device] icon appears. If theicon does not appear, the installation has not been completed properly. Uninstall ( 7-54)and reinstall the driver.