51234IntroductionContents ata GlanceDownloadingImagesCameraSettingsRemoteShootingReferencePreferencesIndexPreparing to Download ImagesTo download to your computer images shot with your camera, you willneed to connect your camera and computer using the interface cableprovided with your camera.1 Connect the large plug of the cable into the USB portof your computer.O For the location and direction of the USB port, refer to thecomputer User’s Manual.2 Connect the small plug of the cable into the < >terminal on your camera.O Connect with the < > mark on the plug facing the front of thecamera.O Image downloading preparation is now complete. Continue with“Starting up EU”.O With the , you can fix the plug to the camerawith the cable protector to prevent the plug from disconnecting.For details on using, refer to p.24.Connecting the Camera and Computer1Ds Mk III 1D Mk IIIStarting up EUWhen the camera’s power switch is set to < ON >, EU will start up, andthe camera and computer will be able to communicate.1 Set the camera’s power switch to < ON >.¿ Communication between the camera and the computer beginsand the above dialog box appears before the dialog box in step 2(Next page) is displayed.¿ With Windows 2000, a dialog box with a message such as[Found New Hardware] is displayed and then automaticallydisappears.