Advanced Guide > Printing Photographs Directly from a Compliant Device (MP240 series) > Printing Photographs Directlyfrom a Compliant Device > About PictBridge Print SettingsAbout PictBridge Print SettingsSettings on a PictBridge Compliant DeviceThis section describes the PictBridge function of the machine. For the print settings on aPictBridge compliant device, refer to the instructions given in the device's instruction manual.NoteIn the following description, names of setting items are given according to those used inCanon-brand PictBridge compliant devices. Setting item names may be different dependingon the brand or model of your device.Some setting items explained below may not be available on some devices. When youcannot change print settings on a device, the machine prints images as follows:Paper size: 4" x 6" / 101.6 x 152.4 mmPaper type: PhotoBordered/Borderless: Follow camera's settingLayout: 1-upPrint quality: StandardImage Optimize: On (the shooting information will be used for optimized printing)This section describes the print settings on a PictBridge compliant device. When operating thedevice, be sure to follow the instructions given in the device's instruction manual.Paper size 4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/10.1 x 18 cm*2*1 Can be selected only on certain Canon-brand PictBridge compliant devices.(May not be selected depending on the device.)*2 Hi Vision may appear on a non-Canon brand PictBridge compliant device.Paper type Default: Photo Paper Plus Glossy II PP-201Photo:Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP-501/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201Fast Photo:Photo Paper Pro PR-201Plain:A4When Paper type is set to Plain, borderless printing will be disabled evenwhen Layout is set to Borderless.Layout Default (Borderless), Index, Bordered, Borderless, 4-up ** Layout compatible with A4 sized paperPrint date &file no.Default (Off: No printing), Date, File No., Both, OffImageoptimizeDefault (Exif Print), On*1, Off, Face*2, Red-Eye*2*1 Photos are optimized for printing using the Photo optimizer pro function.*2 Can be selected only on certain Canon-brand PictBridge compliant devices.(May not be selected depending on the device.)Trimming Default (Off: No trimming), On (follow camera's setting), OffPage topPage 499 of 623 pagesAbout PictBridge Print Settings
