your device referring to its instructionmanual.If the error is still not resolved, check if youcan print another photograph.Check the device connected to the machine.Printing photos directly is possible only witha PictBridge compliant device.E, 1, 3 Ink level cannot be detected. Ink may have run out.The function for detecting the remaining ink levelwill be disabled since the ink level cannot becorrectly detected.If you want to continue printing without thisfunction, press the Stop/Reset button for at least5 seconds.Canon recommends to use new genuineCanon cartridges in order to obtain optimumqualities.Please be advised that Canon shall not beliable for any malfunction or trouble caused bycontinuation of printing under the ink outcondition.E, 1, 4 The FINE Cartridge cannotbe recognized.The FINE Cartridge may not be compatible withthis machine.Install the appropriate FINE Cartridge.Routine MaintenanceE, 1, 5 The FINE Cartridge cannotbe recognized.The FINE Cartridge may not be installedproperly.Open the Scanning Unit (Cover) and install theFINE Cartridge properly.Routine MaintenanceE, 1, 6 Ink has run out. Ink has run out.Replace the ink cartridge and close theScanning Unit (Cover).If printing is in progress and you want tocontinue printing, press the Stop/Reset buttonfor at least 5 seconds with the ink cartridgeinstalled. Then printing can continue under theink out condition.The function for detecting the remaining ink levelwill be disabled.Replace the empty ink cartridge immediatelyafter the printing. The resulting print quality isnot satisfactory, if printing is continued under theink out condition.E, 1, 9(MP240 series)PictBridge compliant deviceis connected via a USB hub.If a PictBridge compliant device is connected viaa USB hub, remove the hub and connect itdirectly to the machine.E, 3, 0 The size of the originalcannot be correctly detectedor the document is toosmall when the Fit-to-Pagecopying is selected.Make sure that the original meets therequirements and is correctly loaded on thePlaten Glass.Check the position and direction of theoriginal loaded on the Platen Glass.E, 3, 1 The machine is notconnected with thecomputer.Connect the machine and the computer with aUSB cable.E, 3, 2E, 3, 3(MP260 series)Scanning the Photo IndexSheet has failed.Make sure that the Photo Index Sheet is setin the correct position and orientation on thePlaten Glass.Make sure that all required circles on thePhoto Index Sheet are filled in.E, 3, 4E, 3, 6No DPOF information./Unable to scan images onThere is no image data saved on thememory card that can be read by thisPage 526 of 623 pagesAn Error Code Is Displayed on the LED
