27PreparationsAF Adjustment1. Press the MENU button.2. Turn the SELECT dial to select [CAMERA SETUP] and press the SET button.3. Select [FB] and then select [ AF ADJUST].4. When the confirmation screen appears, press the SET button to begin the adjustment.5. Once the message “FB ADJUSTMENT SUCCESSFUL” is displayed, press the MENUbutton to close the menu.MF Adjustment1. Press the MENU button.2. Turn the SELECT dial to select [CAMERA SETUP] and press the SET button.3. Select [FB] and then select [ MF ADJUST].4. When the confirmation screen appears, press the SET button to begin the adjustment.5. The camcorder will zoom in to full telephoto. When the message “ADJUST FOCUS &PUSH ” appears, focus as necessary and press the SET button.6. The camcorder will zoom out to full wide-angle. When the message “ADJUST FOCUS& PUSH ” appears, focus as necessary and press the SET button.7. Once the message “FB ADJUSTMENT SUCCESSFUL” is displayed, press the MENUbutton to close the menu.If an error message appears during the flange back adjustment, be sure to reset the FB adjustmentvalue before readjusting the flange back.Resetting the flange back adjustmentsThis procedure will reset the stored flange back adjustment value for the mounted lens.1. Press the MENU button.2. Turn the SELECT dial to select [CAMERA SETUP] and press the SET button.3. Select [FB] and then select [SET DEFAULT].4. Select [YES] and press the SET button.5. Press the MENU button to close the menu.In the following cases the flange back cannot be adjusted correctly and the camcorder will return tothe flange back adjustment selection screen.- The camcorder cannot focus in AF adjustment.- The lens was removed during the flange back adjustment.
