Setting Fax Management6-10System Management Settings6When “Everyday” is selected, press “Next,” and press numbers “1”-“5.” Enter the start timeusing - (numeric keys), and press ”OK.“You can set up to five transfer start times.Enter the time in 24-hour clock format, as four digits without a space.(Example: 7:05 a.m. → 0705; 11:18 p.m. → 2318)If you make an incorrect entry, press (Clear), and enter the correct four-digit number.When “Select Days” is selected, press “Next,” and select the days “Sun”-“Sat.” Pressnumbers “1”-“5”, and enter the starting times using - (numeric keys). Once youhave completed making the settings, press “OK.”You can set up to five starting times for the transfer function, for each day of the week.Enter the time in 24-hour clock format, as four digits without a space.(Example: 7:05 a.m. → 0705; 11:18 p.m. → 2318)If you make an incorrect entry, press (Clear), and enter the correct four-digit number.If “Off” is selected, the transfer function will not be performed automatically at a specificdate/time. Transfer function switching can be performed using the Receiving mode fromthe Special Features screen. (See ‘Changing the Receiving Mode (RX Mode),’ on p. 3-16.)NOTE• You can set “Everyday” for the transfer starting time, and “Select Days” for the transfer endingtime (and vice versa).• If you do not want to specify the time, press (Clear).• The default setting is “Off.”
