Advanced Guide TroubleshootingContents > Routine Maintenance > Cleaning the Paper Feed RollerCleaning the Paper Feed RollerIf the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly.In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform thisonly when necessary.You need to prepare: three sheets of A4 or Letter-sized plain paper1. Make sure that the power is turned on, and remove any paper in the Rear Tray.2. Open the Paper Output Tray gently.3. Clean the Paper Feed Roller.(1) Press the Menu button.(2) Use the (Left) or (Right) button to select Settings , and press the OKbutton.The Settings screen will appear.(3) Use the (Left) or (Right) button to select Maintenance , and press theOK button.The Maintenance screen will appear.(4) Use the (Up) or (Down) button to select Roller cleaning, and press the OKbutton.The confirmation screen will appear.(5) Use the (Up) or (Down) button to select Yes, and press the OK button.The Paper Feed Roller will rotate as it is cleaned.4. Make sure that the Paper Feed Roller stops rotating, and load three sheets of A4 orLetter-sized plain paper in the Rear Tray.5. Repeat the procedures of (4) to (5) in step 3, and clean the Paper Feed Roller withthe loaded papers in the Rear Tray.The paper will be ejected after cleaning.If this does not solve the problem, contact your service center.Page 126 of 853 pagesCleaning the Paper Feed Roller
