Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens >Image SettingsImage SettingsImportantDo not apply these functions to images without moire, dust/scratches or faded colors. The colortone may be adversely affected.Image correction results may not be reflected in the preview image.NoteSelectable settings depend on color mode settings.Scanning may take longer when you use Image Settings.Image Settings allows you to set the following items:Auto ToneWhen this is set to ON, the brightness of the specified portion of the image is automatically optimized.The result of the color adjustment will be reflected in the entire image. This setting is ON by default.ImportantYou can set Auto Tone after preview.You can set this setting when Recommended is selected on the Color Settings tab of thePreferences dialog box.When you click Multi-Crop, this setting turns to ON and you cannot change it.NoteThe color tone may change from the source image due to the Auto Tone function. In that case, setAuto Tone to OFF.Reduce Show-through (when scanning from the ADF (Auto Document Feeder))Use this function to reduce show-through in duplex documents or lighten the base color in recycledpaper and other colored paper when scanning from the ADF (Auto Document Feeder). This setting isLow by default.Page 561 of 853 pagesImage Settings
