Canon 3433B010 Basic Manual

Also see for imagePROGRAF iPF750 MFP M40: Install guide Basic guide Brochure Basic guide User guide

Contents

48Error MessagesError Message Cause Corrective ActionRel lever is in wrong position. The Release Lever is pushedback.Pull the Release Lever forward.Roll printing is selected. You have attempted to print a testprint sheet or other printer statusinformation on a roll, but no roll isloaded.Press ▲ or ▼ to select Load Roll Paper, and thenpress the OK button. Load the roll, and then print.To print on sheets, follow these steps.(→"Loading and Printing on Sheets," User Manual)1. Press ▲ or ▼ to select Stop Printing, and thenpress the OK button to stop printing.(→ , Attaching the Roll Holder to Rolls)(→ , Loading Rolls in the Printer)2. Load a sheet and try printing again.Roll printing is selected, butsheets are loaded.A print job for rolls was receivedwhen a sheet is loaded.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button.Press ▲ or ▼ to select Eject Cut Sheet, press theOK button, and remove the sheet.(→ , Removing Sheets)Load a new roll.(→ , Loading Rolls in the Printer)Follow these steps to load and print on a roll.The printer now starts printing the print job.1.2.Turn off the printer and wait a while before restoringpower.Cannot detect papr The paper has come out of theprinter. Remove the paper and press the OK button.1.2. Reload the sheet, aligning it with the guide on theright.(→ , Loading Sheets in the Printer)Follow these step to reload a sheet.2. Pull the Release Lever forward.Follow these step to reload a sheet.1. Push the Release Lever back and remove thepaper.3. Reload the sheet, aligning it with the guide on theright.(→ , Loading Sheets in the Printer)