154 Additional InformationAccessing the memory card. Do not remove the memory card.- You opened the memory card slot cover while the camcorder was accessing the memory cardor the camcorder started accessing the memory card as you opened the memory card slotcover. Do not remove the memory card until this message disappears.Back up recordings regularly- This message may appear when you turn on the camcorder. In the event of a malfunction,recordings may be lost so back up your recordings regularly.Buffer overflow. Recording was stopped.- The data transfer rate was too high for the memory card in use and the recording wasstopped. Replace the memory card with one rated Speed Class 2, 4 or 6.Built-in memory error- The built-in memory could not be read.Built-in memory is full- The built-in memory is full (“ End” appears on the screen). Delete some recordings( 52, 91) to free some space.Cannot access the built-in memory- There is a problem with the built-in memory.Cannot communicate with the battery pack. Continue using this battery pack?- You attached a battery pack that is not recommended by Canon for use with this camcorder.- If you are using a battery pack recommended by Canon for use with this camcorder, theremay be a problem with the camcorder or battery pack. Consult a Canon Service Center.Cannot copy- The total size of the scenes you selected to copy exceeds the available space on the memorycard. Delete some recordings on the memory card ( 52, 91) or reduce the number ofscenes to copy.- The memory card already contains the maximum number of scenes (3,999 scenes). Deletesome scenes ( 52 ) to free some space.Cannot divide the scene. Initialize only using the camcorder.- The scene could not be divided because the camcorder’s internal scene management data logis full. Save your recordings ( 120) and initialize the memory ( 37). Write back thebackup files and try dividing the scene again.Cannot edit- Could not move a scene in the playlist.Cannot enter standby mode now- The camcorder cannot enter standby mode if the remaining battery charge is too low.Cannot play back- There is a problem with the memory.COPY
