60 VideoCapturing Video Snapshot Scenes from a Movie1 Play back the movie containing the scene you want to capture.2 Press at the point you want to capture.• The camcorder captures a video snapshot scene (the blue frameserves as a visual progress bar) and then automatically changes toplayback pause mode.• When the camcorder finishes capturing, the screen will momentarilyturn black as if a camera shutter had released.NOTES• A video snapshot scene can be captured only during playback; it can-not be captured during playback pause mode.• The captured video snapshot scene is saved to the memory that con-tains the movie.• Video snapshot scenes cannot be captured from any of the followingtypes of movies.- Movies shorter than 1 second.- Movies recorded using another device.- Video snapshot scenes.- Scenes that were edited using the software on the supplied VideoTools CD-ROM and were then written back to the camcorder.• Video snapshot scenes cannot be captured if there is not enough spaceavailable in the memory.• When you start capturing a video snapshot scene less than 1 secondfrom the end of the scene, the video snapshot scene will be capturedstarting from the beginning of the following scene.• During the playback of video snapshot scenes captured from a previ-ously recorded movie, you may notice some anomalies in the picture/sound at the point where the playback switches to a new scene.Combining Video Snapshot Scenes with Music1 Open the original movies index screen and press .Operating modes:Operating modes:START/STOPVIDEO SNAPCOPY
