Additional Information 163[Font Size]: Changes the size of the font for the menu and other screens.• When the font size is set to [A Large], some information may be dis-played in shortened form (icons only, etc.). Some screens will be dis-played using the small font size regardless of the setting.[Output Onscreen Displays]• When set to [A On], the camcorder’s onscreen displays will appearalso on the screen of a TV or monitor connected to the camcorder.[LCD Brightness]: Adjusts the brightness of the LCD screen.• Changing the brightness of the LCD screen does not affect the bright-ness of your recordings, the brightness of the viewfinder (b only) orthe brightness of the playback image on a TV.[LCD Screen Dimmer]: When set to [A On], the LCD screen is dimmed.Doing so is ideal when using the camcorder in locations where the LCD’sillumination could become a nuisance to others. Hold h presseddown for about 2 seconds to restore the LCD screen to its previousbrightness setting.• Dimming the LCD screen does not affect the brightness of your record-ings or the brightness of the playback image on a TV.• When the screen dimmer is set to [B Off], the LCD screen will returnto the brightness level that was in use before the screen was dimmed.[Notification Sounds]: A beep will accompany some operations like turn-ing on the camcorder, the self-timer countdown, etc.[Wireless Remote Control]: Allows the camcorder to be operated with thewireless controller.[Power Saving Mode]: Controls the camcorder's automatic power off set-tings.[Auto Power Off]: In order to save power when the camcorder is poweredby a battery pack, it will automatically shut off if left without any operationfor 5 minutes.• Approximately 30 seconds before the camcorder shuts off, [Auto poweroff] will appear.• In standby mode, the camcorder will shut off after the time selected forthe [Quick Start (Standby)] setting.[Quick Start (Standby)]: Select whether to activate the Quick Start function(0 44) when you close the LCD panel in a recording mode and thelength of time after which the camcorder will end the standby mode andshut off automatically.COPY
