Video 63Pre-RecordingThe camcorder will start recording 3 seconds before you pressg, ensuring you do not miss important shooting opportuni-ties. This is especially useful when it is difficult to predict when to startrecording.1 Activate the pre-recording function.• d appears.• Repeat, selecting [B Off], to turn off pre-recording.2 Press g.The scene recorded in the memory will start 3 seconds beforeg was pressed.NOTES• While pre-recording is activated, the camcorder will not emit any notifi-cation sounds.• The camcorder will not record the full 3 seconds prior to pressingg if the button was pressed within 3 seconds of havingturned on pre-recording or having finished the previous recording.• Any of the following actions will deactivate the pre-recording function.- Leaving the camcorder without any operation for 5 minutes.- Pressing S or z.- Changing the position of the mode switch.- Changing the camcorder's operating mode.- Setting the camcorder to standby mode.- Changing any of the setup menu settings or changing the followingsettings in the FUNC. panel: [Rec. Programs], [White Balance], [AGCLimit], [Digital Effect] or [Image Stabilizer].Operating modes:[FUNC.] 8 [d Pre REC] 8 [A On] 8 [a]COPY
